Today I was looking to do updates on our SharePoint 2007 Server and saw that Service Pack 2 was out. At the same time, I saw there was a bug with it as well. Something with the licensing gets screwed up and you have to re-enter your licensing info. Doesn’t sound like a major bug, but a bug never the less. I think I will wait until they have a fix out, who knows what other little gotchas are sitting around. Here is the link from the SharePoint blog with more detailed info and how to fix the licensing bug (or workaround).
I have been meaning to setup a FreeNAS server for awhile now, actually a real long time. I have some older hardware just laying around, with a 200gig internal SATA drive, and USB ATA storage array (holds up to 4 ATA drives). The storage array is hold about 800+gigs of space, only about a quarter used. Install took about 15 minutes to get up and going. Adding the drives were a snap. I just imported my USB array and can now map to it via NFS. The internal drive I thought I would setup as iSCSI. I really like how that is working out. I have my Windows 2003 and 2008 servers attaching to it, and it is really fast. I am pretty impressed the speed they are attaching at while being virtual and only going over my 100MB network. I also plan on setting up my Vista machines and laptop access so I can do quick transfers on the fly when needed. Here is a good write up on how to setup the iSCSI services within FreeNAS. I may also setup my VMware ESXi environment to take advantage of the iSCSI as well if I get any more spare drives. If you have the hardware and the need for extra storage space, FreeNAS is a way to go (http://www.freenas.org).
A long while ago I was taking a look at an open source application called FOG to look at a method of quickly deploying server images at that time, our MS Virtual Server environment. Flash forward to now, I got some time in the office to look at this again, but now we are using VMware ESXi (until we get our Enterprise licensing this summer sometime). This will probably become obsolete when we get the Enterprise version, but I also wanted to look at this as a solution for my home network as I usually like to get something built on the fly and not have to invest a lot of time into the build. Continue reading Using FOG to deploy server images in VMware ESXi
I recently got a decommissioned HP ML 350 G3 server to use for my VMware ESXi 3.5 environment at home. I have been bumping into a couple of challenges with it. Even though the server is supported according to their hardware specs, some of the stuff I am trying to attach doesn’t seem to be. I am trying to build this environment with only equipment I have, not purchasing anything. First off, here is the existing server configuration:
- Dual Xeon 2.8 Processors
- 4 Gigs of memory
- About a 280gig RAID5 partition (with hot swap drives)
Server works fine as is, but I really wanted to add more external disk space so I could house images on a separate drive array, plus want to setup a backup routine as well (another article on that later). As I have been finding out with VMware ESXi, there are certain challenges, one big one being hardware. It seems VMware has taken the approach that it will support only newer Server hardware, which is fine if you are buying new stuff, but not fine if you are doing the piece meal approach like myself. One of things I would like to attach is a SCSI drive tower box with 6, 72 gig drives and I wanted to do a RAID5 configuration for backup/storage. After about a week of trying different SCSI cards I had laying around at home and extra from work, I was finally able to get one to work, but the drive array itself was not stable and literally took 48 hours to format a RAID5 partition! So back to the drawing board for the external storage.
I found somebody that was willing to buy my 72gig drives for about $50/piece, and I had 8 of them. So after some paypal exchanges I had some extra cash to get my drive array. I went and found an Adaptec 2410SA SATA RAID card on ebay, and 2 500gig SATA II drives over at newegg.com, all for a reasonable price. So I went against what I wanted to do originally and not buy anything, but since I was able to sell the unusable SCSI drives, I was able to purchase what I needed and actually had a few bucks left over. Nice!
Now I am in the process of testing out the external mirror array, I am putting on it the latest beta of Windows 7. So far it seems to be working OK. I also started to load a Windows 2008 image to see how it works out.
Now, if I could only find 2gig chips so I could get this server up to 8 gigs of RAM (well, I did find them, but at about $150 a stick). 4 gigs works, but I can tell the performance hit when I have too many VMs running on it.
Hey, at least the price has been right.
When I found out Google Browser Sync (for Firefox) was going away I was bummed. I really like how I could sync up my bookmarks using my Google info, basically all in one easy place. Well after some digging around, I was able to find Mozilla Weave (this was before GBS put links on their page to it). Unfortunately when I did find it, it was closed for new users due to too much traffic/users. Bummer. Well alas, I found that I could run my own server via Mozilla Weave forums, here is the link to the info on how to build your own Weave server. Fortunately it is not too hard to setup and looks pretty easy to maintain.